brake drum elimination center hub for KING pin spindles Empi aluminum 5x205
Part number:
10-1033
Your cost:
$170.00
Description:
Stud holes are not threaded, use press in studs like part# 70-2850
Turn your 5 lug (5 x 205) front drum wheels into the spindle mount (NOT BALL JOINT) look with these hubs.
Sold each.
Aluminum hub - uses stock bearings like part# 98-4625-B/ 98-4626-B.
You can use your existing bearings and seal (part# 98-4618-B), just like a replacement drum would.
Removing all the drum weight is nice, but this also allows you to remove your backing plate, wheel cylinder, shoes, springs, brake hose, hardware and mounting bolts!
Of course by doing this, you eliminate the front brakes.
part# 10-1029 dust cap fits this right out of the package.
part# 9622 dust cap fits after some modification (roll the edge)
Stud holes are not threaded, use press in studs like part# 70-2850 or 70-2810
Holes measure 14mm across.
Turn your 5 lug (5 x 205) front drum wheels into the spindle mount (NOT BALL JOINT) look with these hubs.
Sold each.
Aluminum hub - uses stock bearings like part# 98-4625-B/ 98-4626-B.
You can use your existing bearings and seal (part# 98-4618-B), just like a replacement drum would.
Removing all the drum weight is nice, but this also allows you to remove your backing plate, wheel cylinder, shoes, springs, brake hose, hardware and mounting bolts!
Of course by doing this, you eliminate the front brakes.
part# 10-1029 dust cap fits this right out of the package.
part# 9622 dust cap fits after some modification (roll the edge)
Stud holes are not threaded, use press in studs like part# 70-2850 or 70-2810
Holes measure 14mm across.
Availability:
Ships within 4-7 business days
We accept the following forms of payment:
