turning brake single straight handle 3/4" polished RT Empi
Part number:
16-2540
Your cost:
$141.60
Description:
The brake cylinders are 3/4" diameter.
The flow through system design does not interfere with your normal brake operation.
Comes with a bleed nipple installed in the wrong port. If yours shows up with the nipple at 'the back' as shown, move it to 'the top'.
The line that feeds the turning brake enters into the single port as shown.
Install your brake hose for the rear brakes into the 'side' ports as shown. We used 90 degree fittings because the seat is close to the brake.
We used square tubing and through bolts to fasten the brake just above the shift rod for a 'no welding' install.
Race Trim unit sold by Empi
15" tall
The flow through system design does not interfere with your normal brake operation.
Comes with a bleed nipple installed in the wrong port. If yours shows up with the nipple at 'the back' as shown, move it to 'the top'.
The line that feeds the turning brake enters into the single port as shown.
Install your brake hose for the rear brakes into the 'side' ports as shown. We used 90 degree fittings because the seat is close to the brake.
We used square tubing and through bolts to fasten the brake just above the shift rod for a 'no welding' install.
Race Trim unit sold by Empi
15" tall
Availability:
Out of stock
We accept the following forms of payment:
