brake drum elimination center hub for Combo spindles Empi aluminum 5x205
Part number:
10-1034
Your cost:
$155.00
Description:
Turn your 5 lug (5 x 205 pattern) front drum wheels into the spindle mount (NOT BALL JOINT) look with these hubs.
Sold each.
Aluminum hub (cast aluminum, then show polished)
For use with Combo spindles
Uses combo bearings (part# 17-2797/ 17-2798).
Removing all the drum weight is nice, but this also allows you to remove your backing plate, wheel cylinder, shoes, springs, brake hose, hardware and mounting bolts!
Of course by doing this, you eliminate the front brakes.
part# 10-1029 dust cap fits this right out of the package.
part# 9622 dust cap fits after some modification (roll the edge)
part# 98-5021-B is the grease seal for the inner bearing
stud holes drilled for 14mm x 2.20 studs (#70-2810) or 14mm x 1.855 (#70-2850) studs.
Holes measure 14mm across.
Sold each.
Aluminum hub (cast aluminum, then show polished)
For use with Combo spindles
Uses combo bearings (part# 17-2797/ 17-2798).
Removing all the drum weight is nice, but this also allows you to remove your backing plate, wheel cylinder, shoes, springs, brake hose, hardware and mounting bolts!
Of course by doing this, you eliminate the front brakes.
part# 10-1029 dust cap fits this right out of the package.
part# 9622 dust cap fits after some modification (roll the edge)
part# 98-5021-B is the grease seal for the inner bearing
stud holes drilled for 14mm x 2.20 studs (#70-2810) or 14mm x 1.855 (#70-2850) studs.
Holes measure 14mm across.
Availability:
Ships within 4-7 business days
We accept the following forms of payment: