oil cooler adapter for remote cooler & filter use Empi / Doghouse o-rings 9203
Part number:
9203-O-Rings
Your cost:
$18.00
Description:
oil cooler adapter for remote coolers w/ O-RING SEALS for a late block install.
w/o barbs.
Top port is out, bottom port is in.
'Block side' holes are designed to accept the stock style rubber o-rings mentioned.
Comes with both 6mm & 8mm bolts to use on the single hole side and 2 bolts etc for the double hole side.
Empi packaged with a paper gasket.
Most of our customers throw away the paper gasket and use the factory rubber seals.
Doghouse always uses the O-RING SEALS on our jobs.
This kit will come with 2 late/late style seals (both sides look identical).
If you're going to use AN fittings, you'll need to tap deep for them to screw in - as we show.
w/o barbs.
Top port is out, bottom port is in.
'Block side' holes are designed to accept the stock style rubber o-rings mentioned.
Comes with both 6mm & 8mm bolts to use on the single hole side and 2 bolts etc for the double hole side.
Empi packaged with a paper gasket.
Most of our customers throw away the paper gasket and use the factory rubber seals.
Doghouse always uses the O-RING SEALS on our jobs.
This kit will come with 2 late/late style seals (both sides look identical).
If you're going to use AN fittings, you'll need to tap deep for them to screw in - as we show.
Availability:
Ships within 4-7 business days
We accept the following forms of payment:
