build or rebuild your short block type 4

ysb4

To have your VW short block rebuilt by us, you must supply the following:

• Pressure wash at a car wash or steam clean the engine before bringing it to be rebuilt. If you're going to ship it, NEVER use styrofoam packing - only paper or cardboard AND ALWAYS use boxes designed for the weight. Double boxing or crating for long blocks and double boxing for short blocks.
• A $500 deposit.
• Bring the short block, which consists of:
  
  • Connecting rods hanging out of the cylinder ports
  • The drain plate on the bottom
  • The flywheel on the back
  • Nothing on the front of the crank
  • Nothing on top
  • Drain the oil. Bring with no oil in it
• $800 for labor only (includes steam cleaning of the disassembled block), with parts, machine work*, and any related shipping being extra.

*Machine Work meaning:

• If I or a machinist needs to use any power tool to provide clearancing
• If I or a machinist needs to use any power tool to drill a hole (for a helicoil for example)
• If I or a machinist needs to use any power tool to shave a cylinder for stud clearance
• If I or a machinist needs to use any power tool to shave a cylinder for rod clearance
• If I or a machinist needs to use any power tool to smooth away debris or sharp edges left over from manufacture of a part
• If I or a machinist needs to use any power tool to smooth away debris or sharp edges left over from previous machine work