1835 short block - an idea what it can cost to build one like it 6-2014
Part number:
1835larry
Your cost:
$1,225.00
Description:
todays price will be more $.
This came to us in June 2014, as a good running long block 1600 single port. Larry wanted a dual port 1835.
We had the block align bored to 40 over, opened the ports for 92's, had the rods rebuilt, block cleaned and main bearings cut for the block.
We installed an Empi 110 cam kit that has drilled lobe lifters and helical cut gears
Double thrust cam bearings and all new main & rod bearings, all steel backed
A fresh reground 10 over crank is installed
1 extra pinion shaft washer is needed
A new gasket kit, flywheel seal, end play shims, pressure relief spring, main woodruff key and top center head studs are installed.
There was shipping involved back and forth to Rimco for the block and rods.
This came to us in June 2014, as a good running long block 1600 single port. Larry wanted a dual port 1835.
We had the block align bored to 40 over, opened the ports for 92's, had the rods rebuilt, block cleaned and main bearings cut for the block.
We installed an Empi 110 cam kit that has drilled lobe lifters and helical cut gears
Double thrust cam bearings and all new main & rod bearings, all steel backed
A fresh reground 10 over crank is installed
1 extra pinion shaft washer is needed
A new gasket kit, flywheel seal, end play shims, pressure relief spring, main woodruff key and top center head studs are installed.
There was shipping involved back and forth to Rimco for the block and rods.
Availability:
Out of stock
We accept the following forms of payment:
