coil relocation mount bracket kit for HS style Rewaco & more
Part number:
CRM
Your cost:
$40.00
Description:
This mounts the coil on the 3-4 cyl tin* below the distributor on the EXISTING lip with 2 holes in it.
Kit consists of:
(1) angle aluminum pre-shaped & drilled
(4) mount bolts
(4) nylock nuts
(4) washers
Install instructions:
Mount your coil to mount using a coil mount like part# 9064
Cut off excess bolt material for a cleaner look
Use other 2 bolts to mount assembly to #4 tin (won't work with trimmed tin, where lip is gone)
Tighten hardware & connect wires
* not advised if you have an oil filter equipped oil pump
Coil stabilizer mount shown in last picture is not included, may be fabricated & used for vehicles that will see lots of vibration or have loose fitting tins
Kit consists of:
(1) angle aluminum pre-shaped & drilled
(4) mount bolts
(4) nylock nuts
(4) washers
Install instructions:
Mount your coil to mount using a coil mount like part# 9064
Cut off excess bolt material for a cleaner look
Use other 2 bolts to mount assembly to #4 tin (won't work with trimmed tin, where lip is gone)
Tighten hardware & connect wires
* not advised if you have an oil filter equipped oil pump
Coil stabilizer mount shown in last picture is not included, may be fabricated & used for vehicles that will see lots of vibration or have loose fitting tins
Availability:
Ships within 1-3 business days
We accept the following forms of payment:
