2052 long block set up for full flow - sold
Part number:
2052lb
Description:
This FULL FLOW long block started as an AH dual relief block.
The block was sent to Brother's Machine for align bore check (perfect .040), cyl bores opened for 94's, piston squirters, new lifter bore sleeves and to have the oil gallies drilled, tapped and plugged (for cleaning & full flow use) and oil pump passage INTO block plugged.
What's in it:
New CB Perf 74 stroke crank
New CB Perf 5.5" I beam rods
New Schadek 30mm oil pump, plugged for full flow
New bearings throughout
New Empi 110 cam kit with drilled lobe lifters
New billet steel straight gear set
New AA p/cyl kit (.033 deck) with Total Seal Gapless 2nd rings
New CB Perf chromoly, lightened, 8 dowel flywheel
New Perf Prod Chromoly gland nut & large washer
New Empi chromoly 10mm head stud kit
New 042 heads (55cc) built by Brothers Machine with 3 angle grind, 40 x 35.5 valves & single spring kit
New stock pushrod tubes
New copper head spacers (.040") for 8.57:1 compression ratio
New stock cyl cool tins
New chromoly stock length pushrods
New aluminum finned snap on valve cover kit
Cleaned & painted stock oil drain plate
Cleaned stock valve train w/ polished shafts, new adjuster screws & HD nuts
Price is plus tax (if applicable) and core (inquire)
Sorry, no shipping unless you're willing to pay for it. Inquire
Not eligible for any shipping promotions
The distributor shown is a gutted, worthless build assist distributor only and is NOT included
The crank pulley shown is only a build pulley and is not included.
The block was sent to Brother's Machine for align bore check (perfect .040), cyl bores opened for 94's, piston squirters, new lifter bore sleeves and to have the oil gallies drilled, tapped and plugged (for cleaning & full flow use) and oil pump passage INTO block plugged.
What's in it:
New CB Perf 74 stroke crank
New CB Perf 5.5" I beam rods
New Schadek 30mm oil pump, plugged for full flow
New bearings throughout
New Empi 110 cam kit with drilled lobe lifters
New billet steel straight gear set
New AA p/cyl kit (.033 deck) with Total Seal Gapless 2nd rings
New CB Perf chromoly, lightened, 8 dowel flywheel
New Perf Prod Chromoly gland nut & large washer
New Empi chromoly 10mm head stud kit
New 042 heads (55cc) built by Brothers Machine with 3 angle grind, 40 x 35.5 valves & single spring kit
New stock pushrod tubes
New copper head spacers (.040") for 8.57:1 compression ratio
New stock cyl cool tins
New chromoly stock length pushrods
New aluminum finned snap on valve cover kit
Cleaned & painted stock oil drain plate
Cleaned stock valve train w/ polished shafts, new adjuster screws & HD nuts
Price is plus tax (if applicable) and core (inquire)
Sorry, no shipping unless you're willing to pay for it. Inquire
Not eligible for any shipping promotions
The distributor shown is a gutted, worthless build assist distributor only and is NOT included
The crank pulley shown is only a build pulley and is not included.
We accept the following forms of payment:
