carb synchronizer Uni-Syn Empi
Part number:
5746
Your cost:
$27.55
Description:
carb synchronizer (flow meter) SU type downdraft or side draft.
Sliding bubble type. Bubble tube is a full pivoting position tube.
Use this for setting:
1) Initial carb idle speeds, before connecting your linkages
2) You NEED this if you have adjusted or altered the air flow adjusting screws position on your IDF, HPMX or Dellorto carb.
Requires a velocity stack or a round neck* to sit on to work.
Have the red indicator move to a set place. Then adjust the other carb until the indicator moves to the same place.
Adjust the spinning center piece to flow enough air to keep the engine running while making adjustments to your carbs.
Empi packaged.
*minimum 1 1/4" to 3" (the padded base is 3" OD with a 1 1/4" hole in the center)
Many tools can be used and they don't show any signs. For that reason: Tools sold on our site are not returnable for any reason.
Sliding bubble type. Bubble tube is a full pivoting position tube.
Use this for setting:
1) Initial carb idle speeds, before connecting your linkages
2) You NEED this if you have adjusted or altered the air flow adjusting screws position on your IDF, HPMX or Dellorto carb.
Requires a velocity stack or a round neck* to sit on to work.
Have the red indicator move to a set place. Then adjust the other carb until the indicator moves to the same place.
Adjust the spinning center piece to flow enough air to keep the engine running while making adjustments to your carbs.
Empi packaged.
*minimum 1 1/4" to 3" (the padded base is 3" OD with a 1 1/4" hole in the center)
Many tools can be used and they don't show any signs. For that reason: Tools sold on our site are not returnable for any reason.
Availability:
Ships within 1-3 business days
We accept the following forms of payment:
