SWIVEL FEET SET (w/o oil hole) style valve adjusters w/shims - Empi
Part number:
21-2031
Your cost:
$35.00
Description:
SWIVEL FEET set of 8 (w/o oil hole) valve adjusters.
Comes with 4 .060 thick* rocker stand shims.
These are Empi quality feet also called swivel foot adjuster or elephant feet.
These have a bigger head on them than the oiled type we sell.
These are better suited for more horsepower demand.
This uses the same nut (8mm x 1.0) as any other valve adjust screw or swivel foot that pivots at the valve stem.
When buying these, consider getting our hd adjuster nut.
*If you do not have threads protruding out of the rocker stand nut on final assembly, you SHOULD CONSIDER removing the assembly and turning the rocker studs out a few turns. This will raise the shoulder of the stud up and allow it to ride in the rocker shaft as originally intended AND it will allow you to have threads protrude through the nut on final assembly.
You can see how much longer these are than a stock valve adjust screw, which makes them ideal to use when an engine is discovered using too short of a pushrod. In our installed shots, you can see the stock screw almost didn't get any nut on it. With lash caps installed and these feet, we have plenty of thread protruding out of the nut.
Empi is out of stock on these until possibly August 2014. Check with us for an update after July 1st.
Comes with 4 .060 thick* rocker stand shims.
These are Empi quality feet also called swivel foot adjuster or elephant feet.
These have a bigger head on them than the oiled type we sell.
These are better suited for more horsepower demand.
This uses the same nut (8mm x 1.0) as any other valve adjust screw or swivel foot that pivots at the valve stem.
When buying these, consider getting our hd adjuster nut.
*If you do not have threads protruding out of the rocker stand nut on final assembly, you SHOULD CONSIDER removing the assembly and turning the rocker studs out a few turns. This will raise the shoulder of the stud up and allow it to ride in the rocker shaft as originally intended AND it will allow you to have threads protrude through the nut on final assembly.
You can see how much longer these are than a stock valve adjust screw, which makes them ideal to use when an engine is discovered using too short of a pushrod. In our installed shots, you can see the stock screw almost didn't get any nut on it. With lash caps installed and these feet, we have plenty of thread protruding out of the nut.
Empi is out of stock on these until possibly August 2014. Check with us for an update after July 1st.
Availability:
Ships within 1-3 business days
We accept the following forms of payment: