axle set 19 1/4" f/ bus trans/ 930 cv joints/ 3 x 3 arms Empi
Part number:
16-2207
Your cost:
$292.00
Description:
These 4340 chromoly IRS race axles (28 splines) are engineered & designed to twist or spool up like a torsion bar to avoid damage to the transmission final drive & to keep the axle from snapping under extreme or race loads.
For high performance, drag & off road conditions.
This set is for you if: you have a bus tranny with 930 flanges & 930 cv's, 3x3 trailing arms with 930 stubs & 930 cv's. Beautiful axles.
19 1/4" end to end
spline length to clip groove is 3"
Because of the long splined areas on these axles, it is easy enough to send them out and have some trimmed off the length and a new retaining ring groove cut, if you want to shorten the overall length.
Precision rack rolled splines, not cut splines! So these make a much stronger spline.
Made in Empi's Chinese manufacturing facility which is TS 16949: 2002 (OEM CERTIFIED)
For high performance, drag & off road conditions.
This set is for you if: you have a bus tranny with 930 flanges & 930 cv's, 3x3 trailing arms with 930 stubs & 930 cv's. Beautiful axles.
19 1/4" end to end
spline length to clip groove is 3"
Because of the long splined areas on these axles, it is easy enough to send them out and have some trimmed off the length and a new retaining ring groove cut, if you want to shorten the overall length.
Precision rack rolled splines, not cut splines! So these make a much stronger spline.
Made in Empi's Chinese manufacturing facility which is TS 16949: 2002 (OEM CERTIFIED)
Availability:
Out of stock
We accept the following forms of payment:
