bend collector 1 1/2" w/ downswept pipe Ceramic coated Empi
Part number:
55-3453
Your cost:
$130.00
Description:
Yours will be Ceramic coated
This u-bend collector (raw style shown, sorry, no ceramic pic yet) is what you'd use if you have an 1 1/2" upswept type exhaust.
Tired of having to plan for rain and your neighbors complaining about your noisey exhaust?
Add this and now your noise goes towards the ground.
No more rain worries and a little less noisey.
Inlet pipes are 1.510" ID x 1.642" OD
Outlet pipe is 1.885" ID x 2" OD
Empi packaged.
Empi says that you should warm up and then allow a cool down period on any ceramic coating to "season" the ceramic prior to reaching any high rpm/temps. Otherwise some blemishing may occur.
Exhaust systems or their components will not be accepted for return or credit if there is evidence of having been installed or used.
This u-bend collector (raw style shown, sorry, no ceramic pic yet) is what you'd use if you have an 1 1/2" upswept type exhaust.
Tired of having to plan for rain and your neighbors complaining about your noisey exhaust?
Add this and now your noise goes towards the ground.
No more rain worries and a little less noisey.
Inlet pipes are 1.510" ID x 1.642" OD
Outlet pipe is 1.885" ID x 2" OD
Empi packaged.
Empi says that you should warm up and then allow a cool down period on any ceramic coating to "season" the ceramic prior to reaching any high rpm/temps. Otherwise some blemishing may occur.
Exhaust systems or their components will not be accepted for return or credit if there is evidence of having been installed or used.
Availability:
Out of stock
We accept the following forms of payment:
