pulley spacer set for crank & top pulley - special offset thickness
Part number:
8688-6
Your cost:
$6.40
Description:
Normally, when using a sand seal, you'd need the big washer out of this kit.
This pulley spacer set of special offset thickness washers fits the top pulley and bottom pulley.
Use this when you add an aftermarket pulley or a sand seal pulley, to insure the crank pulley will not rub against the pulley tin or oil pumps top fastening nuts.
The second (small) washer is to move the top pulley out an equal amount IF NEEDED to align the pulleys so you don't throw belts.
You will also need the extra long bolt & washer (part# 9118) we sell to insure enough threads grab the crank.
This pulley spacer set of special offset thickness washers fits the top pulley and bottom pulley.
Use this when you add an aftermarket pulley or a sand seal pulley, to insure the crank pulley will not rub against the pulley tin or oil pumps top fastening nuts.
The second (small) washer is to move the top pulley out an equal amount IF NEEDED to align the pulleys so you don't throw belts.
You will also need the extra long bolt & washer (part# 9118) we sell to insure enough threads grab the crank.
Availability:
In Stock
We accept the following forms of payment:
