shift shaft end ADJUSTER to adjust shift shaft position- Empi late
Part number:
17-2724
Your cost:
$8.55
Description:
shift shaft ADJUSTER - to adjust shift shaft.
Use this when you cut or make a shift shaft.
This is used at the tranny end.
Fits the late square style shift couplers (part# 16-5103 or 16-5105) just like the end of a stock late shift tube would.
Silver zinc steel.
Empi packaged.
So you know:
The end with the hole fits the pass through bolt on your shift coupler.
The piece with the nut/shoulder will fit the end of your shift shaft (don't weld it until you've done a pre-fit test).
The plain nut will thread on and be loose until you find all your gears, then tighten against the nut you welded to your shaft to maintain your shift position.
Use this when you cut or make a shift shaft.
This is used at the tranny end.
Fits the late square style shift couplers (part# 16-5103 or 16-5105) just like the end of a stock late shift tube would.
Silver zinc steel.
Empi packaged.
So you know:
The end with the hole fits the pass through bolt on your shift coupler.
The piece with the nut/shoulder will fit the end of your shift shaft (don't weld it until you've done a pre-fit test).
The plain nut will thread on and be loose until you find all your gears, then tighten against the nut you welded to your shaft to maintain your shift position.
Availability:
Ships within 1-3 business days
We accept the following forms of payment:
