Piston Squirters
Part number:
piston squirters
Your cost:
$293.75
Description:
Piston squirters are not actually parts you buy.
We send your block to Rimco in California and have it drilled for piston squirters.
Here's what they look like in your block.
See the round shiny spots on the webs of the #3 & #4 ports and the additional round holes in the main bearing saddles on the other side of the block.
You can see that they are 'fed' off of the main journals oil pressure and are aimed at the bottom of the piston to aid in cooling.
If we send your block out, this is what it will cost you.
Your type 1 main bearings are grooved on the back, which allows for 'feeding' these squirter openings. Type 4 main bearings are flat on the back, so they need to be 'drilled to feed' the squirter openings. That main bearing drilling is at an additional cost.
We send your block to Rimco in California and have it drilled for piston squirters.
Here's what they look like in your block.
See the round shiny spots on the webs of the #3 & #4 ports and the additional round holes in the main bearing saddles on the other side of the block.
You can see that they are 'fed' off of the main journals oil pressure and are aimed at the bottom of the piston to aid in cooling.
If we send your block out, this is what it will cost you.
Your type 1 main bearings are grooved on the back, which allows for 'feeding' these squirter openings. Type 4 main bearings are flat on the back, so they need to be 'drilled to feed' the squirter openings. That main bearing drilling is at an additional cost.
We accept the following forms of payment:
